Detailed Product Description

1.0 Features

10V to 30V input Voltage Operation

   10V to 30V (Normal),30V to 33V(Function)

Low Quiescent Current at 10mA

Led Indicator

Efficiency Up to 75% min

2.0 Environment

2.1 Operating

Temperature 0 to 45 (Normal)  Humidity 98%RH

Temperature -20 to  60 (Function,20%load)

2.2 Storage

Temperature -40 to 85    Humidity 98%RH

3.0 Electrical Specifications(Ta=25,Unless Otherwise Specified.)

Output voltage and current tolerance ?5%.

4.0 Protection Funtion

4.1 Input Over Current Protection

Fuse protection

4.2 Input Surge Voltage

When 30V<Vin<40V,the CLA cant  be damaged.If the input voltage exceeds 40V,the fuse can be broken and the TVS can be damaged,but CLA must be normal after replacing fuse and TVS.

4.3 Reverse Voltage Protection

When apply a reverse voltage on CLA,the fuse can broken to perform a protedtion function.But the CLA must work fine after replacing fuse.

4.4 Over Current Protection

The output voltage must be 1.0V when the output current is over 1.5A.

4.5 Over Voltage Protection

It can be component damaged to perform protection function,but the over voltage trip point should not be greater than 9.5V,the decay time should be less than 100msec.Besides,it should no fire under this condition.

4.6 Short Circuit Protection

It should cause no damage to the CLA when output in short circuit condition.

4.7 Output Rise Time

The rise time of the output should be less 20ms.

4.8 Temperature Rise Of Case

The temperature rise of the case should be less than 50 under full load.

5.0 Certificate

CE approved/E-mark approved

6.0 Output Voltage & Current Curve

7.0 Mechanical

7.1 DC Cable Flammability

The DC cable shall have a flammability class of at least 94V2.

7.2 DC Cable Elongation Force

Coiled cord shall withstand 2000 cycles of 250% elongation and return to 115% of its original length within 1 hour.

7.3 Plug Fitting Of The CLA Shaft

The CLA shall fit into the cigarette lighter sockets of any

manufactured car.

  

7.4 Vibration Test (Ambient temperature : 25)

Swept Sine Survey

5 to 500 Hz

5G

octave/minute

and

Random

5 to 500Hz

5G rms

Spectral Density=0.025 form 5 to 50 Hz with 6dB roll off 50 TO 500 Hz

60 minutes

7.5 Shock

The product shall meet the electrical requirements after the shock test at 20G for duration of 11ms for each(?) axis 5 time each.

7.6 Drop Test

The product should have no electrical & mechanical damaged after the 75cm drop test.

7.7 Temperature Rise Of Case

The temperature rise of the case should be less than 50 under full load.

8.0 Immunity Requirements

EC1000-4-2(ESD) Contact: +/-4KV Air: +/- 8KV

IEC1000-4-3(Radiated RS)

  IEC1000-4-4(EFT)

  IEC1000-4-6(Conducted CS)

9.0 EMC Requirements

  The CLA shall comply with CE,and should be certified by E-mark.

10.0 Radio Interference

  The CLA shall not cause any interference with AM/FM car radio while in operation.